Professional Tool Reviews for Pros
The DCN692 is on the heavy side, it's got a small magazine, and it's a little slow. The convenience of this tool is what wins me over. While the Pro that's using a framing nailer all day every day will likely want a more lightweight, lower cost per shot option, it has its place as a punch list tool.
Cordless nailers are becoming more readily available and more relevant as technology improves. One area that has seen little growth in that realm is framing nailers. There are certainly obstacles to overcome with these larger nail sizes. The most significant is getting enough power to fully drive a 3+” nail up to 0.131″ diameter. If you can’t achieve that, there’s not going to be much point in calling it a framing nailer. The DeWalt 20V max framing nailer (model DCN692) gets to that and actually supports nails up to 3.5-inches.
Fortunately for those of us that want to ditch the hose and the gas, we have the option of looking to the DeWalt 20V Max Framing Nailer. They’ve got two models available to choose from. The DCN690 DeWalt 20V Max Framing Nailer is a single-speed nailer while the DCN692 DeWalt 20V Max Framing Nailer is dual speed. Both feature a brushless motor that key in being able to make a lithium-ion framing nailer. We already reviewed the single-speed model, but we were able to get our hands on the dual-speed DCN692 to see if it offered significant gains in performance and features. Aside from the speed selection, the two nailers perform very similarly.
As I mentioned, DeWalt included a brushless motor on the DCN692 20V Max Framing Nailer that helps deliver the power and efficiency required to drive framing nails. It’s capable of accepting either clipped head or offset full round head paper tape nails collated at 30 – 34 degrees. The range of lengths is from 2″ to 3-1/2″ and 0.113″ to 0.131″ diameters. While it’s capable of shooting clipped head nails, users in hurricane and earthquake-prone areas should know that their use is very limited by building codes and you’ll want to go for the offset full round heads. As it is, aside from online dealers, the ability to find clipped head nails may be an exercise in futility. I’m in Florida, and couldn’t find many brick-and-mortar stores that had any in stock.
There’s a lot to talk about in the features category for the DeWalt DCN692 20V Max Framing Nailer. Starting near the business end of the tool, you’ll find the depth-of-drive adjustment wheel. This can pretty easily be adjusted with your thumb and has 11 positive clicking positions to help you gauge where you’re at. In case you aren’t sure if you’re increasing or decreasing the depth of drive, a handy picture is etched in as a guide.
Jam clearing requires you to loosen three screws; two on the nose and a third on the base. This completely releases the magazine and the jam can be cleared. Also, if you’ve stalled the motor nailing into hardwoods, there is a stall release level on the top that will allow the drive cycle to reset. This disables the tool though, and you’ll need to release and reinsert the battery to reset it. In the case of a jam or stall, an indicator light will illuminate on the back of the tool next to a battery indicator.
You select sequential or bump action on the side. The switch itself is actually pretty tough to move. While this should prevent accidental changing of modes, I felt like I might break it when I first flipped it. I’m hoping that it will get a little easier as I use it more. The other mode to choose is between motor speeds. You’ll find this hidden behind the rafter hook when it is tucked away. The lower speed is for 2″ – 3″ nails, while 3-1/4″ to 3-1/2″ should be fired in the higher speed mode. Using the lower speed on the smaller nails should improve efficiency for the battery. However, it’s certainly able to fire them in high-speed mode should you need more power in harder materials.
You’ll find that there is a trigger lock-off for safety during non-use and transportation. There’s also a swiveling rafter hook that’s very handy. It is rigid and substantial enough to come across as very durable. It is wide enough to accommodate hanging on 2x material and can rotate around to either side.
Three main areas of performance were in my sights: power, speed, and run time. I was shooting 2-3/8″ nails and the power is adequate. I can fully drive each nail in the recommended Low-speed setting without much of an issue. Bumping it up to the higher speed setting, I can easily sink each nail below the surface in softer materials like pine. Hardwoods and LVL are a different story.
Speed is a factor that you’ll notice a difference in. It wasn’t difficult to find a rhythm that the DeWalt 20V Max Framing Nailer could keep up with in bump-fire mode. It was much slower than I have been able to use with a compressor powered nailer, however. There’s also a significant difference in speed in sequential fire mode. That’s because you’re having to wait for the motor to spool up the flywheel before each shot.
Runtime is pretty solid with this nailer. Firing framing nails is no joke when it comes to producing enough power and using a 20V battery to do it. I was able to get in more than 500 shots before stopping to recharge the battery. While there was still some juice left, it’s not a good idea to completely discharge a Lithium-ion battery if you’d like to maintain your battery and extend its lifespan. For the Pros out there, 500 shots are good, but you’re probably going to want a second battery as a spare while the other recharges.
One thing that stood out to me as I was using the DeWalt 20V Max Framing Nailer is that I did not experience any jamming. There were a couple of attempted shots that didn’t go during testing, but that was due to the nailer still resetting the drive cycle while I had gotten ahead of it.
The DeWalt 20V Max Framing Nailer performed well in my tests. While I’m content in that department, there are a few considerations that may limit who the best end-user is for it. Weight is one of the biggest considerations here. At 9.1 pounds, the DCN692 is heavier than most framing nailers on the market. It also only has a 55 nail capacity and a 7-9 nail remaining dry fire lockout. This means you’ll be reloading one strip at a time and more frequently. Bump fire moves along at a decent clip, but sequential requires you to wait for the motor to spool up which slows down production.
When it comes to value, the compressor powered nailer is still the way to go. 30-degree nailers aren’t that widespread in our area, and there is a premium on the price of the nails. I’d love to see DeWalt retool this with a 21-degree magazine that would make this cordless nailer about the same price as a Pro level pneumatic with a Pro level compressor. The cost per shot would then be equal and we’re talking a major win in value.
For these reasons, it’s the professional end-user that needs a framing nailer for occasional use that is going to benefit the most. Pros that are using a framing nailer for the majority of the day or a lot of overhead work will likely prefer the lighter weight and faster action of traditional compressor powered or gas-assisted nailers.
Still, we really like the quicker performance of the Metabo HPT cordless framing nailer. It uses the battery to charge a pressurized gas chamber as opposed to operating a flywheel. As a result, it’s a much more responsive tool.
Don’t let that sway you from a performance standpoint though. The DeWalt 20V Max Framing Nailer did very well for me. I’m in the boat of occasional framing nailer user and the DCN692 has found a home in my arsenal. The fact that I have no compressor and hose to drag around, nor gas cartridges to keep replacing gives this nailer a convenience factor that outweighs its limitations. If you’re a pro needing a framing nailer for occasional use and want to go cordless, the DeWalt 20V Max Framing Nailer is for you.
On the clock, Kenny dives deep to discover the practical limits and comparative differences for all kinds of tools. Off the clock, his faith and love for his family are his top priorities, and you'll typically find him in the kitchen, on his bike (he's an Ironman), or taking folks out for a day of fishing on Tampa Bay.
Arguably one of the oldest tools known to humanity is the hammer. The irony is that we’re still trying to come up with new ways to improve it! While it might be a prehistoric tool, it’s unlikely to go extinct any time soon since most homes (at least in the USA) are still constructed out […]
This review started off as a sort of bait and switch. You see, I was asked if I would like to review “a tool belt or two” for Pro Tool Reviews. “Sure, send them over,” I said. Reviewing and choosing the right or best tool belt or tool rig isn’t hard if you’re picking from a few products. After […]
Ridgid’s 18V Crown Stapler Offers More Power In A Compact Body Whether you’re installing insulation, screening, or reupholstering furniture, Ridgid hopes its 18V cordless crown stapler could be the do-it-all tool for you. Find out how its compact body and longer runtime could benefit your jobsite or home improvement projects. Ridgid 18V Cordless Crown Stapler: […]
DeWalt’s Xtreme 12V Oscillating Tool Has Something For Everyone Woodworkers, DIYers, and working professionals will find the DeWalt DCS353 12V Xtreme oscillating tool offers plenty of options for completing projects. Whether you use it for trimming wood, sanding down furniture, or cutting into metal, DeWalt promises pro-grade results. We dive into this tool and its […]
I have this gun for more than 2 years, working great for first year, only for nailing fresh woods, (not use much, 3, 4 times for year),it not have enough power to nail down dry woods or hard woods, then have to replace the return springs, cost 50 dollars, after first year,good for use light work only, it cost too much moneys, not ding full time work. don’t buy it for the money to paid for
Just got the 2-speed DCN692 model for a future finished basement project, and probably use it on a few other projects. I’m not a pro, just a diy homeowner, so this should fit my needs well. Was looking for recommendations on the best nails to use.
This review is very good and confirms my impression that this is a very useful third framing gun, but doesn’t replace the air nailers. The only thing I don’t agree with you about is, the fact of it using paper collated Paslode nails is the best thing about it! I wouldn’t want one if it didn’t. Also, now that these have been out for a few years, I wonder and hope the durability and reliability are improved. Thanks for the info. Keep up he good work.
Do not buy this nail gun. In just over a year I’ve had it replaced twice and had to send it to the factory twice and once again is isn’t working right now. When it works it’s great, I build fences so I air guns are a bit of a hassle, my gas powered gun has worked for 20+ years and is starting to show it’s age,I liked the idea of not having to buy gas cartridges so I tried to replace it with this guy, no good, I’m gonna fix this one one last time and sell it, I… Read more »
Just letting you know the dewalt framing nailer shoots offset paper collated full round head nails not just clipped head so it is compliant in florida
As an Amazon Associate, we may earn income when you click on an Amazon link. Thanks for helping us do what we love.
See our Privacy Policy and Terms & Conditions.
Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. That piqued our interest.
There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman!
Copyright ©2008-2022 Pro Tool Reviews, LLC. All rights reserved.
Professional Tool Reviews for Pros